4
ABOUT THIS MANUAL
The IS system provides various manuals to meet various system planning and work processes. Use the manuals necessary for your
system.
Manual confi gurations
The following manuals are provided for a standard (IP) system. Read all the manuals for installing, setting up, and using a standard (IP)
system, or provide the manuals to the persons working with the system.
INSTALLATION MANUAL (A booklet included with the central control unit (IS-CCU))
Used for installing and connecting control units, stations and power supply unit. (For an installer or serviceman)
INSTALLATION MANUAL (A booklet included with the IP master station (IS-IPMV))
Used for installing and connecting IP master stations and IP video door stations (mainly for a network direct system). (For
an installer or serviceman)
SETTING MANUAL (This manual on the CD-ROM included with the IP control unit (IS-IPC))
This manual describes how to make the system settings and system maintenance. (For an installer or serviceman)
OPERATION MANUAL (An electronic manual on the CD-ROM included with the IP control unit (IS-IPC))
Information for using the system for calling, communicating, paging, monitoring, etc. (For users of the system)
PURPOSE OF THE SYSTEM SETTINGS
Confi gure the system settings based on how your system is planned to be used. System settings must be completed before the
system will operate.
CAUTION:
Make the settings correctly. If the settings are not made correctly, the system will not function as planned.
To Next Page
Loading...
Need help?
General
