Aiphone IS SERIES Setting Manual

37
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
M
Settings on [Remote site master call] setting
window
You can set a station (master station, door station or room
sub station) that receives a call from a master station in a
remote site. One station can be set for each priority.
Click
1)
Reference
for “Normal”.
All the registered stations are displayed in the list in
another window.
Check the box for the target station in the list, and then
2)
click
Close
.
The current window closes and the set station is
displayed in the [Remote site master call] setting
window.
To delete a set station
Click
Delete
for "Normal".
Selecting another station also overwrites the previous
*
one.
Make the setting for “Priority” and “Urgent” in the same way.
N
Settings on [Remote site door call] setting
window /
O
Settings on [Remote site room sub call]
setting window
You can set up to 20 master stations that receive a call
from a door /room sub station in a remote site. Up to 20
master stations can be set for each priority.
Click
1)
Reference
for “Normal”.
All the registered master stations are displayed in the
list in another window.
Check the boxes for the target master stations in the
2)
list, and then click
Close
.
The current window closes and the set stations are
displayed in the [Remote site door call]/ [Remote site
room sub call] setting window.
To delete a set station
Check the box for the target station and click
Delete
.
You can also select two or more stations and delete
*
them at a time.
Make the setting for “Priority” and “Urgent” in the same way.
P
Settings on [Remote site paging] setting window
You can set a zone that receives paging from a remote
site. One zone can be set for each priority.
Select the target zone from the pull-down menu for
1)
“Normal”.
Make the setting for “Priority”,“Urgent”and “Broadcast”
*
in the same way.
Q
Settings on [Remote site chime] setting window
You can set a zone that receives chime paging from a
remote site. One zone can be set for each priority.
Select the target zone from the pull-down menu for
1)
“Normal”.
Select a sound fi le or sound sequence for chime from
2)
the pull-down menu.
Make the setting for “Priority” and “Urgent” in the same way.
*

Aiphone IS SERIES Specifications

General

Brand	Aiphone
Model	IS SERIES
Category	Intercom System
Language	English