Airflow Instruments ProHood PH731 - Page 41

Chapter 4: Menu Setup and Navigation 33
View Data/Choose Test
To view stored data, first select the Test ID that contains the data to be recalled. This is accomplished
in the Choose Test menu.
MENU
Pressure Tool
Display Setup
Flow Setup
Actual/Std Setup
Settings
Data Logging
Bluetooth Functions
Applications
Cf Selection
Calibration
DATA LOGGING
Measurements
Log Mode/Display Mode Manual/RunAvg
Log Settings
Choose Test Test 001
Name Test
View Data
Delete Data
% Memory
VIEW DATA
Choose Test Test 001
View Stats
View Samples
Print Test
PREVIOUS NEXT
CHOOSE TEST
Test 001 9 Samples
Test 002 7 Samples
Test 003 20 Samples
Test 004 15 Samples
Test 005 38 Samples
Test 006 12 Samples
Test 007 0 Samples
NEW DATES
View Stats
Displays statistics (average, minimum, and maximum) of a selected Test ID and the number of
samples, date and time the samples were taken.
MENU
Pressure Tool
Display Setup
Flow Setup
Actual/Std Setup
Settings
Data Logging
Bluetooth Functions
Applications
Cf Selection
Calibration
DATA LOGGING
Measurements
Log Mode/Display Mode Manual/RunAvg
Log Settings
Choose Test Test 001
Name Test
View Data
Delete Data
% Memory
VIEW DATA
Choose Test Test 022
View Stats
View Samples
Print Test
Use the  and  arrow keys to view statistics of all the measurement parameters stored in a Test ID.
TEST 022
Velocity (TA)
Avg 250 ft/min
Min 219 ft/min
Max 272 ft/min
# Samples 3
03/15/12 09:01:39 AM
PREVIOUS NEXT
TEST 022
Temperature
Avg 74.0 F
Min 73.8 F
Max 74.3 F
# Samples 3
03/15/12 09:01:39 AM
PREVIOUS NEXT
TEST 022
%RH
Avg 28.5 %RH TA
Min 28.4 %RH TA
Max 28.6 %RH TA
# Samples 3
03/15/12 09:01:39 AM
PREVIOUS NEXT
Example: TEST 022 has three (3) samples, each sample consists of a velocity, temperature, and
relative humidity reading. Use the < or > keys to view statistics of each measurement parameter.