AirLive N.MINI - Page 31

4. Web Configuration
AirLive N.MINI User’s Manual
24
Beacon Interval Beacon Interval is the amount of time between beacon
transmissions. Before a station enters power save mode, the
station needs the beacon interval to know when to wake up to
receive the beacon. Range 20-1024 ms, default is 100.
Preamble Type A preamble is a signal used in wireless environment to
synchronize the transmitting timing including Synchronization and
Start frame delimiter. You can select Long or Short for the
preamble type.
IAPP Select Enabled or Disabled to execute this function.
Protection Select Enabled or Disabled to execute the security function.
Aggregation Select Enabled or Disabled to execute this function.
Short GI Select Enabled or Disabled to execute this function.
WLAN Partition Select Enabled or Disabled to execute this function.
STBC Select Enabled or Disabled to execute this function. The default is
Disabled.
20/40MHz Coexist Select Enabled or Disabled to execute this function. The default is
Disabled.
RF Output Power Select the transmitting power rate 100%, 70%, 50%, 35%, 15%.