▪ Always carry out maintenance operations when the machine is at a standstill position and
after having removed the key from the control panel with the platform in rest position.
▪ The maintenance operations described below refer to a machine with ordinary working use. In
case of difficult conditions of use (extreme temperatures, corrosive environments, etc.) or
following long machine inactivity, it will be necessary to contact the AIRO assistance service
to change the intervention schedule.
▪ Repairs and maintenance operations are to be carried out by trained and authorised
personnel only. All maintenance operations should be carried out in compliance with the
current work safety regulations (work places, personal protection equipment, etc...).
▪ Carry out only the maintenance and adjustment operations described in this user manual. In
emergency situations (e.g. breakdown, wheels replacement) contact Our Technical Support.
▪ During interventions, check that the machine is completely locked. Before carrying out
maintenance operations inside the lifting structure, check that this is off-line in order to avoid
accidental lowering of the booms.
▪ Remove the battery cables and provide batteries with a suitable protection during welding
operations.
▪ Carry out maintenance operations on the heat engine only when it is not running and
sufficiently cool (except for those operations, such as oil change, which must be performed
when the motor is hot). Risk of burns in contact with hot parts.
▪ Do not use petrol or other flammable materials to clean the heat engine.
▪ For maintenance operations on the heat engine, read the manufacturer's manual of the motor
supplied on machine purchase.
▪ In case of replacement, use original spare parts only or spare parts approved by the
manufacturer.
▪ Disconnect the 230V AC and/or 380V AC sockets, if any.
▪ The lubricants, hydraulic oils, electrolytes and all detergent products should be handled with
care and disposed of in safety according to the current regulations. A prolonged contact with
the skin may cause irritations and dermatosis; wash with water and soap and rinse
thoroughly. Contact with eyes, especially with electrolytes, is also dangerous; rinse with
water thoroughly and call the doctor.