After the first 10 working hours and, afterwards,
once a month check the oil level in the tank by
means of the provided indicator A in the picture
aside) and make sure that it always lies between
the max. and min. values. If necessary, top up
until the max. level is reached. The oil check
should be carried out when platform is completely
lowered and telescopic boom in.
Completely change the hydraulic oil at least every
two years.
To empty the tank:
▪ Lower the platform completely and
retract the telescopic boom extension.
▪ stop the machine by pressing the
emergency stop button of the ground
control panel.
▪ Place a container under cap (B), under
the tank, and unscrew it.
Use only the types of oil and quantity indicated in
the table below.
The lubricants, hydraulic oils, electrolytes and all detergent products should be handled with care and disposed of in
safety according to the current regulations. A prolonged contact with the skin may cause irritations and dermatosis; wash
with water and soap and rinse thoroughly. Contact with eyes, especially with electrolytes, is also dangerous; rinse with
water thoroughly and call the doctor.
To Next Page
Loading...