Aktilite CL128 - Page 22

Service Manual Aktilite CL128
Version 1. 3 Page 22 of 41
Step 23
Step 23 30 is only relevant if you have changed
the housing or main arm.
Put back on the washers and spring.
Step 24
Step 23 30 is only relevant if you have changed
the housing or main arm.
The last washer must be properly seated into the
hole.
Step 25
Step 23 30 is only relevant if you have changed
the housing or main arm.
You have to get the washer well inside the hole or
else it will not fit on to the axle.