Akuvox R20A Admin Guide

14
● LED Color: it can support three colors: Red, Green, Blue.
● LED Display Mode: to set up the different blink frequencies.
7.3.Set up LED Display from HTTP URL
Akuvox door phones support to use HTTP URL to remote control the LED display
status. You can enter the HTTP URL in the browser to manage the LED color and
frequency.
Parameters Set-up:
● HTTP URL format:
http://PhoneIP/fcgi/do?action=LedAction&State=1&Color=1&Mode=2500
● Status: 1=Idle; 2=OffLine; 3=Calling; 4=Talking; 5=Receiving; Color:
1=Green; 2=Blue; 3=Red; Mode: 0=Always On; 1=Always Off;
500/1000/1500/2000/25000/3000
Note:
● The Status and Color of item can not be changed.
● The LED of upgrading mode can not be adjusted.
AKUVOX SMART INTERCOM www.akuvox.com

Akuvox R20A Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ingress Protection	IP65
Card Reader	13.56MHz, Mifare
RS485	Yes
Camera	2MP
Network	10/100Mbps Ethernet
Protocols	SIP
Power	PoE or 12V DC
PoE	IEEE 802.3af
Relays	1
Input	2