EasyManuals Logo

Akuvox R20A Admin Guide

Akuvox R20A
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
37
Parameters Set-up:
Multicast Priority Paging Barge: multicast or how many multicast calls are
higher priority than SIP call, if you disable Paging Priority Active, SIP call will
have high priority.
Paging Priority enabled: multicast calls are called in order of priority or not.
Listening Address: enter the multicast IP address you want to listen. The
multicast IP address needs to be the same as the listened part and the
multicast port can not be the same for each IP address. Multicast IP address
is from 224.0.0.0 to 239.255.255.255.
Label: enter the label for each listening address.
10.7.7.Configure Maximum Call Duration
Door phone allows you to set up the call time duration in receiving the call from
the calling device as the caller side might forget to hang up the intercom device.
AKUVOX SMART INTERCOM www.akuvox.com

Table of Contents

Other manuals for Akuvox R20A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox R20A and is the answer not in the manual?

Akuvox R20A Specifications

General IconGeneral
AudioBuilt-in Microphone and Speaker
InstallationWall-mounted
Ingress ProtectionIP65
Card Reader13.56MHz, Mifare
RS485Yes
Camera2MP
Network10/100Mbps Ethernet
ProtocolsSIP
PowerPoE or 12V DC
PoEIEEE 802.3af
Relays1
Input2

Related product manuals