EasyManuals Logo

Akuvox R20A Admin Guide

Akuvox R20A
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
70
17.Monitor and Image
17.1.RTSP Stream Monitoring
Akuvox door phone support RTSP stream that allows intercom devices such as
the indoor monitor or the monitoring unit from the third party to monitor or obtain
the real time audio/ video (RTSP stream) from the door phone using the correct
URL.
17.1.1.RTSP Basic Setting
You are required to set up RTSP function on device web Intercom > RTSP >
RTSP Basic interface in terms of RTSP Authorization, authentication and
password etc before you are able to use the function.
Parameter Set-up:
RTSP Server Enable: click on Enable and Disable in RTSP Enable eld to
turn on or turn off the RTSP function.
RTSP Authorization Enabled: click on Enable and Disable in RTSP
Authorization field to enable or disable the RTSP authorization. If you enable
the RTSP Authorization, you are required to enter RTSP Authentication Type,
RTSP Username, RTSP Password on the intercom device such as indoor
monitor for authorization.
AKUVOX SMART INTERCOM www.akuvox.com

Table of Contents

Other manuals for Akuvox R20A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox R20A and is the answer not in the manual?

Akuvox R20A Specifications

General IconGeneral
AudioBuilt-in Microphone and Speaker
InstallationWall-mounted
Ingress ProtectionIP65
Card Reader13.56MHz, Mifare
RS485Yes
Camera2MP
Network10/100Mbps Ethernet
ProtocolsSIP
PowerPoE or 12V DC
PoEIEEE 802.3af
Relays1
Input2

Related product manuals