Parameter Set-up:
● HTTP URL: tick the check box to enable HTTP URL notification.
● HTTP URL: if you choose HTTP mode, enter the URL format: http://http
server IP address/any information.
16.5.Security Action Configuration
16.5.1.Configure Push Button Action
When pressing the push button, the door phone will trigger the preconfigured
action type, the notification can be sent out by Email, FTP notification or SIP call.
To do this configuration on web Intercom > Basic interface.
Parameter Set-up:
● Action To Execute: to choose which action to be executed after triggering.
16.5.2.Configure Motion Action
When the Motion Detection feature is working, you can make it trigger an action.
To do this configuration on web Intercom > Motion interface.
Parameter Set-up:
●
Action To Execute: to choose which action to be executed after triggering.
To Next Page
Loading...
Need help?
General
