Akuvox R20A Admin Guide

73
Parameter Set-up:
● NACK Enabled: enable the NACK. It can be used to prevent losing data
packet in the weak network environment when discontinued and mosaic
video image occurred.
17.2.MJPEG Image Capturing
Akuvox door phone allow you to capture the Mjpeg format monitoring image if
needed. You can enable the Mjpeg function on Intercom > RTSP > RTSP Basic
and set the image quality on the web Intercom > RTSP > MJPEG Video
Parameters interface.
AKUVOX SMART INTERCOM www.akuvox.com

Akuvox R20A Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ingress Protection	IP65
Card Reader	13.56MHz, Mifare
RS485	Yes
Camera	2MP
Network	10/100Mbps Ethernet
Protocols	SIP
Power	PoE or 12V DC
PoE	IEEE 802.3af
Relays	1
Input	2