● User Name: to configure username for ACS or CPE.
● Password: to configure password for ACS or CPE.
● Periodic Inform: to enable periodically inform.
● Periodic Interval: to configure interval for periodic inform.
9.9.Device Web HTTP Setting
This function is used to manage whether the device website is allowed to be
accessed. The door phone supports two types of remote access methods HTTP
and HTTPS(encryption). To do this configuration on the web Network >
Advanced > Web Server interface.
Parameters Set-up:
● HTTP Enabled: set whether HTTP access to the device web page is
allowed, Enabled is allowed, Disabled is not allowed, the default is Enabled.
● HTTPS Enabled: set whether HTTPS access to the device web page is
allowed, Enabled is allowed, Disabled is not allowed, the default is Enabled.
● HTTP Port: set up the port for HTTP access method. 80 is the default port.
● HTTPS Port: set up the port for HTTPS access method. 443 is the default
port.
Note:
● TR-069 is a technical specification entitled CPE WAN Management
Protocol (CWMP). It defines an application layer protocol for remote
management of end-user devices.
To Next Page
Loading...
Need help?
General
