Akuvox R20A Admin Guide

34
Parameter Set-up:
● Call Type: select the group call or sequence call (Robin call) for the manager
dial call.
● Sequence Call: sequence call is used to initiate multiple numbers when your
press the manager dial button. If the previous callee does not answer within
the robin call timeout, the call will be transferred to the next one. If the call is
answered by one of the callee, the call will not be transferred anymore.
● Group Call: group call is used to initiate calls to multiple numbers at the
same when you press the manager dial button.
● Sequence Call Number(Local): enter the sequence call number. You can enter
five sequence call number maximum in each line.
After the manager dial is set up, you can set up relays to be triggered by the
manager dial if needed.
AKUVOX SMART INTERCOM www.akuvox.com

Akuvox R20A Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ingress Protection	IP65
Card Reader	13.56MHz, Mifare
RS485	Yes
Camera	2MP
Network	10/100Mbps Ethernet
Protocols	SIP
Power	PoE or 12V DC
PoE	IEEE 802.3af
Relays	1
Input	2