Please refer to the following description for the Authentication mode:
No authentication is required for HTTP API as
it is only used for demo testing.
This mode is used by Akuvox developers only.
If this mode is selected, you are only required
to fill in the IP address of the third party device
for the authentication. The whitelist is suitable
for operation in the LAN.
If this mode is selected, you are required to fill
in the User name and the password for the
authentication. In Authorization field of HTTP
request header, use Base64 encode method to
encode of username and password.
Password encryption method only supports
MD5. MD5(#Message-Digest Algorithm)
In Authorization field of Http request header:
WWW-Authenticate:Digest
realm="HTTPAPI",qop="auth,auth-
int",nonce="xx", opaque="xx".
This mode is used by Akuvox developers only.
AKUVOX SMART INTERCOM www.akuvox.com
To Next Page
Loading...
Need help?
General
