Akuvox R26C - Audio Echo Cancellation; Adjusting AEC Level

14
● LED Color: it can support three colors: Red, Green, Blue.
● LED Display Mode: to set up the different blink frequencies.
7.3.Set up LED Display from HTTP URL
Akuvox door phones support to use HTTP URL to remote control the LED display
status. You can enter the HTTP URL in the browser to manage the LED color and
frequency.
Parameters Set-up:
● HTTP URL format:
http://PhoneIP/fcgi/do?action=LedAction&State=1&Color=1&Mode=2500
● Status: 1=Idle; 2=OffLine; 3=Calling; 4=Talking; 5=Receiving; Color:
1=Green; 2=Blue; 3=Red; Mode: 0=Always On; 1=Always Off;
500/1000/1500/2000/25000/3000
Note:
● The Status and Color of item can not be changed.
● The LED of upgrading mode can not be adjusted.
AKUVOX SMART INTERCOM www.akuvox.com