● Gravity sensor Threshold: set the threshold for the gravity sensory
sensitivity. The lower the value is, the higher the value will be. The gravity
sensor value is 32 by default.
● Trigger Options: select what can be triggered when the gravity sensor is
triggered.
16.2.Client Certificate Setting
Certificates can ensure communication integrity and privacy when deploying
Akuvox door phone. So, when the user needs to establish SSL protocol, it is
necessary to upload corresponding certificates for verification.
Web Server Certificate:#it is the certificate that sends to clients for authentication
when clients require an SSL connection with Akuvox door phone. Currently, the
format of the certificate can be accepted by Akuvox door phone is *.PEM file.
Client Certificate:# When Akuvox door phone Phone required an SSL connection
with servers, the phone must verify the server to make sure it can be trusted. and
the server will send its certificate to the Akuvox door phone. Then the door phone
will verify this certificate according to client certificate list.
16.2.1.Web Server Certificate
To upload Web Server certificate on the device web interface Security >
Advanced > Web Server Certificate.
16.2.2.Client Certificate
To upload and configure client certificate on the same page.
To Next Page
Loading...
Need help?
General
