23.2.Integration via HTTP API
HTTP API is designed to achieve an network-based integration between the third
party device with the Akuvox intercom device. You can configure the HTTP API
function on the web Intercom > HTTP API interface for the integration.
Parameter Set-up:
● Enabled: enable or disable the HPTT API function for the third party
integration. For example, if the function is disabled any request to initiate the
integration will be denied and be returned HTTP 403 forbidden status.
● Authorization Mode: select among four options: “None” “WhiteList”
“Basic”, “Digest” for authorization type, which will be explained in detail in
the following chart.
● User Name: enter the user name when “Basic” and “Digest” authorization
mode is selected. The default user name is “Admin”.
● Password: enter the password when “Basic” and “Digest” authorization
mode is selected. The default user name is “Admin”.
● 1st IP-5th IP: enter the IP address of the third party devices when the
“WhiteList” authorization is selected for the integration.
To Next Page
Loading...
Need help?
General
