Parameters Set-up:
● Multicast Priority Paging Barge: multicast or how many multicast calls are
higher priority than SIP call, if you disable Paging Priority Active, SIP call will
have high priority.
● Paging Priority enabled: multicast calls are called in order of priority or not.
● Listening Address: enter the multicast IP address you want to listen. The
multicast IP address needs to be the same as the listened part and the
multicast port can not be the same for each IP address. Multicast IP address
is from 224.0.0.0 to 239.255.255.255.
● Label: enter the label for each listening address.
10.7.7.Configure Maximum Call Duration
Door phone allows you to set up the call time duration in receiving the call from
the calling device as the caller side might forget to hang up the intercom device.
To Next Page
Loading...
Need help?
General
