Parameter Set-up:
● Call Type: select the group call or sequence call (Robin call) for the manager
dial call.
● Sequence Call: sequence call is used to initiate multiple numbers when your
press the manager dial button. If the previous callee does not answer within
the robin call timeout, the call will be transferred to the next one. If the call is
answered by one of the callee, the call will not be transferred anymore.
● Group Call: group call is used to initiate calls to multiple numbers at the
same when you press the manager dial button.
● Sequence Call Number(Local): enter the sequence call number. You can enter
five sequence call number maximum in each line.
After the manager dial is set up, you can set up relays to be triggered by the
manager dial if needed.
To Next Page
Loading...
Need help?
General
