Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 102 of 221
BLF feature is not applicable to SP-R50P IP phones.
Visual BLF PickUp Alert
When the monitored user receives an incoming call, the supervisor’s phone will play an alert
tone and display a visual prompt.
In addition to the BLF key, by pressing the programmed BLF soft key, the supervisor will pick up
the monitored user’s incoming call. The directed call pickup code must be configured in
advance.
Note:
Visual alert for BLF pickup feature is not applicable to SP-R50P IP phone.
BLF LED Mode
BLF LED Mode provides two kinds of definition for the BLF key LED status.
Line key LED
LED Status Description
Solid green The monitored user is idle.
Fast flashing green The monitored user receives an incoming call.
Slow flashing green The monitored user is dialing.
The monitored user is talking.
Off The monitored user does not exist.
DSS Key LED
LED Status Description
Solid green The monitored user is idle.
Slow flashing red The monitored user receives an incoming call.
Solid red The monitored user is dialing.
The monitored user is talking.
Off The monitored user does not exist.
Procedure
BLF can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf
/<MAC>.conf
Specify whether to use visual alert and audio
alert for BLF pickup.
Assign a BLF key.
Local Web User Interface Assign a BLF key.
Navigate to:

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English