Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 144 of 221
feature simultaneously. When this feature is enabled on both phones, the type of encryption to
utilize for the session is negotiated between the IP phones. This negotiation process is compliant
with RFC 4568.
When a user places a call on the enabled SRTP phone, the IP phone sends an INVITE message
with the RTP encryption algorithm to the destination phone.
Procedure
SRTP can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf/
<MAC>.conf
Configure SRTP feature on a per-line basis.
Local Web User Interface Configure SRTP feature on a per-line basis.
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=3&id=2
To configure SRTP feature via web user interface:
1. Click on Account > Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value from the pull-down list of Voice Encryption (SRTP).
Resource Files
When configuring particular features, you may need to upload resource files (e.g., local contact
directory, remote phone book) to IP phones. The resources files can be local contact directory,
remote phone book and so on. Ask Akuvox field application engineer for resource file templates.
If the resource file is to be used for all IP phones of the same model, the resource file access URL
is best specified in the <r0000000000xx>.conf file. However, if you want to specify the desired
phone to use the resource file, the resource file access URL should be specified in the
<MAC>.conf file.
To Next Page
Loading...
Need help?
General
