Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 76 of 221
displays the received return code. There are three return code available, 486(Busy Here),
404(Not Found) and 480(Temporarily Unavailable)
Procedure
DND can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf/<MAC>.conf Configure DND
Local
Web User Interface
Configure DND
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=4&id=2
Phone User Interface Configure DND
To configure DND via web user interface:
1. Click on Phone > Call Feature
2. On DND, select the desired value from the pull-down list of DND
3. Select the desired value from the pull-down list of Return Code When DND
4. Enter the desired value in DND On Code
5. Enter the desired value in DND Off Code
6. Click Submit to accept the changes
To configure DND via phone user interface:
1. Press Menu > Features > DND Code
2. Press Up or Down to highlight Active, press Left or Right to select the desired value
3. Press Up or Down to highlight On Code, enter the desired value
4. Press Up or Down to highlight Off Code, enter the desired value
5. Press Save to accept the change
Return code when refuse provisions the return code and reason of the SIP response
message for the refused call. According to the received return code, the reason will be
To Next Page
Loading...
Need help?
General
