Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 29 of 221
also have an impact on your network performance. For more information on these
parameters, contact your network administrator.
PPPoE
PPPoE is Point-to-Point Protocol over Ethernet. It is a network protocol for encapsulating
PPP frames inside Ethernet frames. It is a network protocol used by Internet Service
Providers (ISPs) to provide Digital Subscriber Line (DSL) high speed Internet services.
Procedure
PPPoE can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf/<MAC>.conf Configure PPPoE on the IP phone.
Local
Web User Interface
Configure PPPoE on the IP phone.
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=2&id=1
Phone User Interface Configure PPPoE on the IP phone.
To configure PPPoE via web user interface
1. Click on Network > Basic
2. In LAN Port, mark the PPPoE radio box.
3. Enter the user name and password in corresponding fields.
4. Click Submit to accept the change

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English