Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 82 of 221
1. Use two different accounts to create two lines talking in the phone (For example, use
account 1 to create line 1 talking and account 2 for line 2).
2. Press the Up or Down key on the phone keyboard to select the talking you will create for
conference, the talking must be on activated status ( For example, select the talking in
account 1)
3. Press the Conference soft key to add the two lines talking to conference.
Note
You can press the Hold soft key to hold the conference; also you can press the Split soft
key to split the conference to two standalone talking, press the Cancel soft key to end
conference.
Call Pickup
Directed call pickup is used for picking up an incoming call on a specific extension. A user can
pick up the incoming call using a PickUp soft key.
Procedure
Call pickup can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf/<MAC>.conf
Assign a pickup key.
Configure pickup key
Local
Web User Interface
Assign a pickup key.
Configure pickup key
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=4&id=4
Phone User Interface
Assign a pickup key.
Configure pickup key
To set a specified call pickup key via web user interface:
1. Click on Phone > Key/Display
2. Select the desired key to set PickUp by selecting from the pull-down list of Type of Line
Key/Soft Key/Function Key/DSS Key (DSS Key only applicable to R59)
3. Enter the desired value in the Label field, if Label is applicable (Label only applicable to

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English