Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 118 of 221
Phone Registration
Registration methods of the fallback mode include:
 Concurrent registration: The IP phone registers to two SIP servers (working server and
fallback server) at the same time. In a failure situation, a fallback server can take over the
basic calling capability, but without some of the advanced features offered by the working
server (default registration method).
 Successive registration: The IP phone only registers to one server at a time. The IP phone
first registers to the working server. In a failure situation, the IP phone registers to the
fallback server.
When registering to the working server, the IP phone must always register to the primary
server first except in failover conditions. When the primary server registration is unavailable,
the secondary server will serve as the working server.
Server redundancy can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf/
<MAC>.conf
Configure the server on the IP phone.
For more information
Local Web User Interface Configure the server on the IP phone.
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=3&id=1
To configure server redundancy for fallback purpose via web user interface:
1. Click on Account > Basic.
2. Select the desired account from the pull-down list of Account.
3. Configure registration parameters of the selected account in the corresponding fields.
4. Select the desired value from the pull-down list of Transport.
5. Configure parameters of SIP server 1 and SIP server 2 in the corresponding fields.

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English