Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 134 of 221
Configuration File <r0000000000xx>.conf/
<MAC>.conf
Configure the codecs to use on a per-line basis.
Configure the priority and rtpmap for the
enabled codec.
Configure the ptime.
Local Web User Interface Configure the codecs to use and adjust the
priority of the enabled codecs on a per-line
basis.
Configure the ptime.
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=3&id=2
To configure the codecs to use and adjust the priority of the enabled codecs on a per-line basis
via web user interface:
1. Click on Account > Advanced.
2. Select the desired account from the pull-down list of Account.
3. Click on Codec.
4. Select the desired codec from the Disable Codecs column and then click . The selected
codec appears in the Enable Codecs column.
5. Repeat the step 4 to add more codecs to the Enable Codecs column.
6. To remove the codec from the Enable Codecs column, select the desired codec
and then click .
7. To adjust the priority of codecs, select the desired codec and then click
or .
8. Click Submit to accept the change.
To configure the ptime on a per-line basis via web user interface:

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English