EasyManuals Logo

Akuvox SP-R5xP User Manual

Akuvox SP-R5xP
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 167 of 221
0:Disabled(Default).
1:Enabled.
Config.AccountX.NAT.UdpKeepEnable Enable or Disable NAT keep-alive.
0:Disabled(Default).
1:Enabled.
Config.AccountX.NAT.UdpKeepInterval Configure the NAT keep-alive interval.
The range of the value is 15~60(in
seconds).Default is 30.
Config.AccountX.NAT.NatTraversal Configure the NAT Traversal.
Config.AccountX.NAT.StunServer Configure the NAT stun server address.
The range of the value length is 1~63 characters.
Config.AccountX.NAT.StunPort Configure the NAT stun server port.
The range of the value is 1~65535.
Config.AccountX.NAT.Rport Configure the rport.
The range of the value is 1~65535.
Config.AccountX.Blf.SubscribePeriod Configure the BLF subscribe period(1800 seconds
by default).
The range of the value is 1800~65535(in
seconds).Default is 1800.
Config.AccountX.Blf.BlfListUri Configure the Blf List Uri.
The range of the value is 1~65535.
Config.AccountX.VoiceMsg.Number Configure the voice message number.
The range of the value length is 1~63 characters.
Config.AccountX.Auto_Answer.Enable Enable or Disable auto answer when receiving a
incoming call for account X(X ranges from 1 to 3).
0:Disabled(Default).
1:Enabled.
Config.AccountX.Subscribe.SubscribeRegister Enable or Disable subscribe the register status.
0:Disabled(Default).
1:Enabled.
Config.AccountX.Subscribe.SubscribePeriod Configure the subscribe period of the register(in
seconds), the range is 1800~65535, default is
1800.
Config.AccountX.Subscribe.SubscribeACDExpire Configure the subscribe period of the ACD(in
seconds), the range is 1800~65535, default is
1800.
Config.AccountX.Subscribe.SubsribeMWI Enable or Disable subscribe the MWI status;
0:Disabled(Default); 1:Enabled
Config.AccountX.Subscribe.SubscribeMWIExpire Configure the subscribe period of the MWI(in
seconds), the range is 1800~65535, default is
1800.
Config.AccountX.Call.Enable100Rel Enable or Disable 100 reliable retransmission;
0:Disabled(Default); 1:Enabled.
Config.AccountX.Call.Ptime Configure the RTP packet time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox SP-R5xP and is the answer not in the manual?

Akuvox SP-R5xP Specifications

General IconGeneral
BrandAkuvox
ModelSP-R5xP
CategoryIP Phone
LanguageEnglish

Related product manuals