Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 184 of 221
#Configure the IP address of the SNMP server
;Config.Network.Snmp.TrustedAddress =
#Configure PC port type; 0:Router; 1:Bridge
;Config.Network.PC.Type =
#Configure PC router IP
;Config.Network.PC.RouterIP =
#Configure PC subnet mask
;Config.Network.PC.SubnetMask =
#Enable or disable the PC dhcp feature; 0:Disabled(default); 1:Enabled
;Config.Network.PC.EnableDhcp =
#Configure PC start IP and end IP
;Config.Network.PC.StartIP =
;Config.Network.PC.EndIP =
#Configure the max and min RTP port
;Config.Network.RtpPort.Max =
;Config.Network.RtpPort.Min =
#Configure the QOS values
;Config.Network.Qos.SignalTos =
;Config.Network.Qos.RtpTos =
#Configure the LLDP
;Config.Network.LLDP.LLDPEnable =
;Config.Network.LLDP.Interval =
#Enable or disable the VPN feature; 0:Disabled(default); 1:Enabled
;Config.Network.VPN.Enable =
#TR069 Configuration
#Enable or disable the TR069 feature; 0:Disabled (default); 1:Enabled;
;Config.TR069.General.Enable = 0
#Configure the username and password for the phone to authenticate with the ACS;
;Config.TR069.ManagementServer.Username =
;Config.TR069.ManagementServer.Password =

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English