Name: Akuvox SP-R5xP
Brand: Akuvox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Administrator’s Guide for Akuvox SP-R5xP IP Phones

Page 190 of 221

;Config.Account2.NAT.Rport =

#Configure the blf subscribe period(1800 seconds by default);

;Config.Account2.Blf.SubscribePeriod = 1800

#Configure the blf list uri;

;Config.Account2.Blf.BlfListUri =

#Configure the voice message number;

;Config.Account2.VoiceMsg.Number =

#Enable or Disable auto answer when receiving a incoming call for accout1; 0:Disabled(Default);

1:Enabled;

;Config.Account2.Auto_Answer.Enable = 0

#Enable or Disable subscribe the register status; 0:Disabled(Default); 1:Enabled;

;Config.Account2.Subscribe.SubscribeRegister = 0

#Configure the subscribe period of the register(in seconds), the range is 1800~65535, default is

1800;

;Config.Account2.Subscribe.SubscribePeriod = 1800

#Configure the subscribe period of the ACD(in seconds), the range is 1800~65535, default is

1800;

;Config.Account2.Subscribe.SubscribeACDExpire = 1800

#Enable or Disable subscribe the MWI status; 0:Disabled(Default); 1:Enabled;

;Config.Account2.Subscribe.SubsribeMWI = 0

#Configure the subscribe period of the MWI(in seconds), the range is 1800~65535, default is

1800;

;Config.Account2.Subscribe.SubscribeMWIExpire = 1800

#Enable or Disable 100 reliable retransmission; 0:Disabled(Default); 1:Enabled;

;Config.Account2.Call.Enable100Rel = 0

#Configure the RTP packet time; 0(Disabled), 10, 20, 30, 40, 50, 60;

;Config.Account2.Call.Ptime =

#Configure the register expire time(1800 seconds by default);

;Config.Account2.Reg.Timeout = 1800

;Config.Account2.Reg.Timeout2 =

#Configure the DTMF type; 0:Inband; 1:RFC2833(Default); 2:Info; 3:Inband + Info; 4:Info +

Akuvox SP-R5xP User Manual

Questions and Answers: