Name: Akuvox SP-R5xP
Brand: Akuvox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Administrator’s Guide for Akuvox SP-R5xP IP Phones

Page 193 of 221

#Configure the backup outbound proxy server address and port;

;Config.Account3.OutProxy.BakServer =

;Config.Account3.OutProxy.BakPort =

#Configure the Stun feature;

;Config.Account3.Stun.Enable =

;Config.Account3.Stun.Server =

;Config.Account3.Stun.Port =

#Enable or Disable SRTP Encryption; 0:Disabled(Default); 1:Enabled;

;Config.Account3.Encryption.SRTPEncryption = 0

#Configure the NAT keep-alive and the keep-alive interval(in seconds);

;Config.Account3.NAT.UdpKeepEnable =

;Config.Account3.NAT.UdpKeepInterval =

;Config.Account3.NAT.NatTraversal =

;Config.Account3.NAT.StunServer =

;Config.Account3.NAT.StunPort =

;Config.Account3.NAT.Rport =

#Configure the blf subscribe period(1800 seconds by default);

;Config.Account3.Blf.SubscribePeriod = 1800

#Configure the blf list uri;

;Config.Account3.Blf.BlfListUri =

#Configure the voice message number;

;Config.Account3.VoiceMsg.Number =

#Enable or Disable auto answer when receiving a incoming call for accout1; 0:Disabled(Default);

1:Enabled;

;Config.Account3.Auto_Answer.Enable = 0

#Enable or Disable subscribe the register status; 0:Disabled(Default); 1:Enabled;

;Config.Account3.Subscribe.SubscribeRegister = 0

#Configure the subscribe period of the register(in seconds), the range is 1800~65535, default is

1800;

;Config.Account3.Subscribe.SubscribePeriod = 1800

#Configure the subscribe period of the ACD(in seconds), the range is 1800~65535, default is

1800;

;Config.Account3.Subscribe.SubscribeACDExpire = 1800

Akuvox SP-R5xP User Manual

Questions and Answers: