Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 213 of 221
;Config.Settings.Language.WebLang = 0
#Enable or disable the NTP feature; 0:Disabled; 1:Enabled(default);
;Config.Settings.SNTP.Enable = 1
#Configure the time zone and time zone name for the phone; time zone ranges from -11 to +12
(0 by default); time zone name (GMT by default);
;Config.Settings.SNTP.TimeZone = 0
;Config.Settings.SNTP.Name = GMT
#Configure the primary and secondary NTP servers. Default-0.pool.ntp.org.
#The value can be the domain name or IP address of the NTP server.
;Config.Settings.SNTP.NTPServer1 = 0.pool.ntp.org
;Config.Settings.SNTP.NTPServer2 = 1.pool.ntp.org
#Configure the update interval(in seconds) when using NTP Server(3600 by default);
;Config.Settings.SNTP.Interval = 3600
#Configure the daylight saving time feature. 0-Disabled, 1-Enabled, 2-Automatic(default);
;Config.Settings.SNTP.DTS = 2
#Configure the DST type when the DST was set to Enabled. 0-Date, 1-Week;
;Config.Settings.DateTime.Type = 0
#Configure the start time of DST.(1/1/0 by default)
#If the DST type is set to By Date,the value format is Month/Day/Hour;
#If the DST type is set to By Week, the value format is Start Month/Start Day of Week/Start Day
of Week Last in Month/Start Hour of Day.
#For example,the value is 1/4/2/5, it means the start time is at 5 o'clock on Tuesday, the 4th
week in January;
;Config.Settings.SNTP.StartTime = 1/1/0
#Configure the end time of DST, (12/31/23 by default), the value format is the same as the start
time;
;Config.Settings.SNTP.EndTime = 12/31/23
#Configure the offset time (in minutes), ranges from -300 to 300,(60 by default) the valid value is
Integer;
;Config.Settings.DateTime.Offset = 60
#Configure the time format, 0-12 Hour, 1-24 Hour(default);
;Config.Settings.DateTime.TimeFormat = 1
#Configure the date format,
To Next Page
Loading...
Need help?
General
