EasyManuals Logo

Akuvox SP-R5xP User Manual

Akuvox SP-R5xP
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 27 of 221
3. Click Submit to accept the change.
A dialog box pops up to prompt that if the IP has been changed, please login again.
4. Click OK to confirm and login again
To configure DHCP via phone user interface:
1. Press Menu > Settings > Advanced Setting (password: admin) > Network > LAN Port.
2. Press Up or Down button to highlight the DHCP
3. Press Enter to accept the change
The IP phone makes settings effective after a short period of time.
Static IP
When static IP is applied, it means you need to configure the network parameter manually.
The following parameters should be configured for IP phones to establish network
connectivity:
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Procedure
Network parameters can be configured manually using the configuration files or locally.
Configuration File <r0000000000xx>.conf/<MAC>.conf
Configure network parameters of the IP
phone manually

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox SP-R5xP and is the answer not in the manual?

Akuvox SP-R5xP Specifications

General IconGeneral
BrandAkuvox
ModelSP-R5xP
CategoryIP Phone
LanguageEnglish

Related product manuals