Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 42 of 221
make any changes, the user can only fill in the value, otherwise the update will fail.
Example: To set the PPPOE username and password info, you use the following format:
Note: Each line in the configuration file beginning with # is a comment statement does
not affect the update.
Once the configuration file is updated successfully with the configuration file shown
above, the user will login to the pppoe server by username(James) and
password(123456).
Firmware and/or Configuration File Updates
The followings are some of the common file updates.
1. Firmware Update
To update firmware, you define the following lines in the configuration file:
Config.Firmware.Url = protocol name://address/path/filename
Example:
Config.Firmware.Url = tftp://192.168.10.19/1.0.0.135.rom
2. Personalized Ringtones
To set personalized ringtones, you define the following lines in the configuration
file:
Config.Ringtone.Url = protocol name://address/path/filename
Example:
Config.Ringtone.Url = tftp://192.168.10.19/Ring1.wav
Note: Ring1.wav is a ringtone wav file. Total custom ringtone file size cannot be more
than 100KB.
To update two custom ringtones, you define the following lines in the configuration
file:

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English