Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 97 of 221
Configured tones can be heard on IP phones for the following conditions.
Condition Description
Ring Back Ring-back tone
Dial When in the pre-dialing interface
Call Waiting Call waiting tone
Procedure
Tones can be configured using the configuration files or locally.
Configuration File <r0000000000xx>.conf/<MAC
>.conf
Configure the tones for the IP
phone.
Local Web User Interface Configure the tones for the IP
phone.
Navigate to:
http://<phoneIPAddress>/fcgi/
do?id=4&id=6
To configure tones via web user interface:
1. Click on Phone > Tones.
2. Select the desired type from the pull-down list of Select Country.
If you select Custom, you can customize a tone for each condition of the IP phone.