Need help?Do you have a question about the Akytec PR200 and is the answer not in the manual?
Details essential safety measures and warnings for device operation and handling.
Defines the proper application of the PR200 and outlines improper usage scenarios.
Explains the cyclical operating sequence of the PR200 device.
Explains how to configure and operate the PR200 in Modbus Slave mode.
Describes how to configure and operate the PR200 as a Modbus Master.
Explains how to configure the PR200's analog inputs (Al1-Al4).
Details the configuration of analog outputs AO1 and AO2.
Instructions for installing the PR200 on a DIN rail.
Details the electrical connections for inputs, outputs, and power supply.
Details the steps for calibrating the analog inputs of the PR200.
Provides step-by-step instructions for replacing the device's battery.
Details the procedure for installing an interface card into the PR200.
To Next Page
General