...................................................................................................................................................................................................
15
Perform a cold reset on the card.
CLI config card card type shelf slot reset cold
WEBUI Select the card, click the Reboot tab, select Cold Reboot >Submit.
...................................................................................................................................................................................................
16
Reseat the card. Refer to “Reseating a Card” (p. 3-19).
...................................................................................................................................................................................................
17
Replace the alarmed card. Refer to “Replacing System Components” (p. 3-20). Follow
the return and repair process in the Customer and Product Support guide to return the
faulty card to an authorized repair center for replacement.
Trouble-clearing procedures
PWRADJFAIL
PWRADJFAIL (Power Adjustment Failure)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-262
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
