EasyManua.ls Logo

Alcatel-Lucent 1830 PSS-16 - Page 528

Alcatel-Lucent 1830 PSS-16
722 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RCVROPTPROG
RCVROPTPROG (Receiver Optimization in Progress)
The Line input port on one of the 40G OT cards is tuning after recovering from an LOS.
After a 40G OT card has initialized successfully, the Tunable Dispersion Compensator
(TDC) and Delay Line Interferometer (DLI) on the line-side receive path will
automatically tune to optimize transmission performance. During the TDC/DLI
optimization, the RCVROPTPROG alarm is raised to notify the user that the pack is
tuning, and transmission is not yet stable. When the TDC/DLI tuning process is
completed, the alarm clears.
Severity Minor
Service affecting? No
Applicability 112SA1L, 112SCA1, 112SCX10, 112SX10L, 43SCX4, 43STA1P,
43STX4, 43STX4P
Corrective Action
NOTICE
Service-disruption hazard
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure “Reseating a Card” (p. 3-19).
If
there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
This procedure details the corrective action for a RCVROPTPROG against the Line port.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
If the LOS alarm cleared less than 10 minutes ago wait for the alarm to clear.
...................................................................................................................................................................................................
2
Ensure that the administrative state of the port is Admin Up. When it is Up, then toggle
the administrative state from UP > DOWN > UP.
Trouble-clearing procedures
RCVROPTPROG
RCVROPTPROG (Receiver Optimization in Progress)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-278
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011

Table of Contents

Related product manuals