Procedure
...................................................................................................................................................................................................
1
Look at the activity of services on all ports of the card:
CLI show interface
<shelf/slot port>
srvcActivity brief
...................................................................................................................................................................................................
2
If any services are marked as Active then this equipment is currently carrying active
services.
...................................................................................................................................................................................................
3
It may be possible to switch all services onto an alternate path if all services are protected.
Examine the output from Step 1. If a service is protected it will have a protection member
listed.
...................................................................................................................................................................................................
4
If you wish to switch all protected services off this path:
1. Obtain the details of the service activity
CLI show interface
<shelf/slot port>
srvcActivity detail
This will reveal the nodes that are the endpoints of the service as well as the APS
protection groups.
Repeat items 2 through 5 for each protected service:
2.
Log into the one end of the service.
3. Issue a force switch away from the path about to be broken.
4. Log into the other end of the service.
5. Issue a force switch away from the path about to be broken.
...................................................................................................................................................................................................
5
To confirm if all services have been moved off of this equipment
1. Log back into the local node.
2. Look at the activity of services on all ports of the alarmed card.
CLI show interface
<shelf/slot/port>
srvcActivity brief
3. If any services are marked as Active then this equipment is still carrying active
services.
Supporting procedures
Checking for Services on a Port
Procedure
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
3-11
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
