Interface Configuration
7750 SR Interface Configuration Guide Page 117
Per-fp-ing-queuing
Per-fp-ing-queuing optimization for LAG ports provides the ability to reduce the number of
hardware queues assigned on each LAG SAP on ingress when the flag at LAG level is set for per-
fp-ing-queuing.
When the feature is enabled in the config>lag>access context, the queue allocation for SAPs on a
LAG will be optimized and only one queuing set per ingress forwarding path (FP) is allocated
instead of one per port.
The following rules will apply for configuring the per-fp-ing-queuing at LAG level:
• To enable per-fp-ing-queuing, the LAG must be in access mode
• The LAG mode cannot be set to network mode when the feature is enabled
• Per-fp-ing-queuing can only be set if no port members exists in the LAG
• Per-fp-ing-queuing cannot be set if LAG’s port-type is hsmda.
To Next Page
Loading...
