Alcatel-Lucent 7750 - Configuring MDA;CMA Access and Network Pool Parameters

Interfaces
Page 190 7750 SR Interface Configuration Guide
Configuring MDA/CMA Access and Network Pool Parameters
MDA-level pools are used by ingress network queues. Network policies can be applied (optional)
to create and edit QoS pool resources on egress network ports, channels, and ingress MDAs.
Network-queue and slope policies are configured in the
config>qos context.
The following example displays an MDA pool configuration:
A:ALA-B>config>card>mda# info
----------------------------------------------
mda-type m10-1gb-sfpcx
network
egress
pool
slope-policy "B"
exit
exit
exit
access
ingress
pool
resv-cbs 50
slope-policy "A"
exit
exit
exit
----------------------------------------------
A:ALA-B>config>card>mda#