Alcatel-Lucent 7750 - Port Configuration Commands

Interfaces
Page 272 7750 SR Interface Configuration Guide
Port Configuration Commands
config
Port Configuration Commands
— port {port-id | bundle-id | bpgrp-id | aps-id}
—no port {bundle-id | bpgrp-id | aps-id}
— access
— egress
— [no] pool [name]
— amber-alarm-threshold percentage
—no amber-alarm-threshold
— red-alarm-threshold percentage
—no red-alarm-threshold
— resv-cbs percent-or-default amber-alarm-action step percent
max [1..100]
— resv-cbs percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— ingress
— [no] pool [name]
— amber-alarm-threshold percentage
—no amber-alarm-threshold
— red-alarm-threshold percentage
—no red-alarm-threshold
— resv-cbs percent-or-default amber-alarm-action
step percent
max [1..100]
— resv-cbs percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— [no] ddm-events
— description long-description-string
— no description
— dwdm
— amplifier
— report-alarms [ild] [tmp] [mth] [mtl] [los] [lop] [com]
— channel channel
— coherent
— channel channel
— cpr-window-size window-size
— dispersion dispersion
— mode {automatic|manual}
— report-alarms [modflt] [mod] [netrx] [nettx] [hosttx]
— rx-los-thresh threshold
— sweep start dispersion-start end dispersion-end
— target-power power
— [no] rxdtv-adjust
—tdcm
— channel
— dispersion dispersion
— mode {automatic | manual}
— report-alarms [nrdy] [mth] [mtl] [unlck] [tlim] [einv] [com]
— sweep start dispersion-start end dispersion-end
— wavetracker