Alcatel-Lucent 7750 - Configuring Cards and Compact Media Adapters (Cmas)

Interfaces
Page 188 7750 SR Interface Configuration Guide
Configuring Cards and Compact Media Adapters (CMAs)
Card configurations must include a chassis slot designation. A slot must be preconfigured with the
type of cards and CMAs which are allowed to be provisioned.
Note: Compact Media Adapters (CMAs) are configured using the MDA command. Output for
Compact Media Adapter MDAs show a “c” in the
mda-type description, for example,
c8-10/100eth-tx.
Use the
config > info command to display card configuration information:
A:7710-3>config# info
. . .
#------------------------------------------
echo "Card Configuration"
#------------------------------------------
card 1
card-type iom-xp
mda 5
mda-type c8-10/100eth-tx
exit
mda 6
mda-type c8-10/100eth-tx
exit
exit
#------------------------------------------