Alcatel-Lucent 7750 - Configuring Wavetracker Parameters

Interface Configuration
7750 SR Interface Configuration Guide Page 227
Configuring WaveTracker Parameters
The following example displays the default configuration with WaveTracker disabled:
*A:ALA-A>config>port>dwdm># info
----------------------------------------------
channel 44
----------------------------------------------
*A:ALA-A>config>port>dwdm># info detail
----------------------------------------------
channel 44
wavetracker
no power-control
no encode
report-alarm enc-fail enc-degr pwr-fail pwr-degr pwr-high pwr-low
exit
rxdtv-adjust
----------------------------------------------
The following example displays a configuration with DWDM channel 44, WaveTracker power
control transmit power at -7.5 dBm and WaveTracker encoded keys 205 and 749
*A:ALA-A>config>port>dwdm># info
----------------------------------------------
channel 44
wavetracker
power-control
target-power -7.50
exit
encode key1 205 key2 749
exit
----------------------------------------------
*A:ALA-A>config>port>dwdm># info detail
----------------------------------------------
channel 44
wavetracker
power-control
target-power -7.50
exit
encode key1 205 key2 749
report-alarm enc-fail enc-degr pwr-fail pwr-degr pwr-high pwr-low
exit
rxdtv-adjust
----------------------------------------------
*A:ALA-A>config>port>dwdm># wavetracker
*A:ALA-A>config>port>dwdm>wavetracker># info
----------------------------------------------
power-control
target-power -7.50
exit
encode key1 205 key2 749