Alcatel-Lucent 7750 - Show Commands

Interface Configuration
7750 SR Interface Configuration Guide Page 585
Show Commands
Hardware Show Commands
chassis
Syntax chassis chassis-id [environment] [power-supply] [ccm]
chassis [detail]
chassis [environment] [power-management] [ccm]
Context show
Description This command displays general chassis status information.
Parameters chassis-id — Displays chassis 1, 2, etc for router chassis.
environment — Displays chassis environmental status information.
Default Displays all chassis information.
power-supply — Displays chassis power supply status information.
Default Displays all chassis information.
ccm — Displays chassis control module information.
Output Chassis Output — The following table describes chassis output fields.
Label Description
Name
The system name for the router.
Type
Displays the router model number.
Chassis Topology
The Chassis Topology is determined by the Active CPM when it boots up:
- Standalone
- Extended (XRS-40): The active CPM is running in a Master chassis.
Chassis role
Chassis Roles are:
- Standalone: the value for all non-XRS SR OS systems
Location
The system location for the device.
Coordinates
A user-configurable string that indicates the Global Positioning System
(GPS) coordinates for the location of the chassis.
For example:
N 45 58 23, W 34 56 12
N37 37' 00 latitude, W122 22' 00 longitude
N36*39.246' W121*40.121'