Alcatel-Lucent 7750 - Hardware Commands

Interfaces
Page 266 7750 SR Interface Configuration Guide
Hardware Commands
Card Commands
config
— [no] card slot-number
— capability {sr | ess} [now]
— card-type card-type
—no card-type
— [no] fail-on-error
— [no] named-pool-mode
MCM Commands
— [no] mcm mcm-slot
— mcm-type mcm-type
—no mcm-type
— [no] shutdown
MDA Commands
— [no] card slot-number
— [no] mda mda-slot
— access
— egress
— [no] pool [name]
— amber-alarm-threshold percentage
—no amber-alarm-threshold
— red-alarm-threshold percentage
—no red-alarm-threshold
— resv-cbs percent-or-default amber-alarm-action
step percent max [1..100]
— resv-cbs percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— ingress
— [no] pool [name]
— amber-alarm-threshold percentage
—no amber-alarm-threshold
— red-alarm-threshold percentage
—no red-alarm-threshold
— resv-cbs percent-or-default amber-alarm-action
step percent max [1..100]
— resv-cbs
percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— clock-mode adaptive
— clock-mode differential [timestamp-freq {19440 | 77760 | 103680}]
— egress
— hi-bw-mcast-src [alarm] [group group-id]
—no hi-bw-mcast-src
— egress-xpl
— threshold threshold
— window window
— [no] fail-on-error