Alcatel-Lucent 7750 - Page 324

Interfaces
Page 324 7750 SR Interface Configuration Guide
MDA/Port QoS Commands
access
Syntax access
Context config>card>mda
config>port
Description This command enables the access context to configure egress and ingress pool policy parameters.
On the MDA level, access egress and ingress pools are only allocated on channelized MDAs/CMAs.
network
Syntax network
Context config>card>mda
config>port
Description This command enables the network context to configure egress and ingress pool policy parameters.
On the MDA level, network egress pools are only allocated on channelized MDAs/CMAs.
egress
Syntax egress
Context config>port>access
config>card>mda>access
config>card>mda>network
config>port>network
Description This command enables the context to configure egress buffer pool parameters which define the percentage
of the pool buffers that are used for CBS calculations and specify the slope policy that is configured in the
config>qos>slope-policy context.
On the MDA level, network and access egress pools are only allocated on channelized MDAs/CMAs.
ingress
Syntax ingress
Context config>card>mda>access