Alcatel-Lucent 7750 - Table 25: Mda;Port Type Pairing for APS

Port Features
Page 92 7750 SR Interface Configuration Guide
Supported APS MDA/Port Combinations
Table 25 displays examples of the port types that can be paired to provide APS protection. Both
ports must be the same type and must be configured at the same speed.
For example, an APS group can be comprised of a pair of ports where each port is on one of the
two following MDAs:
• m16-atmoc3-sfp
• m4-atmoc12/3-sfp (port in oc3 mode)
For example, an APS group can not be comprised of a pair of ports where one port is on an m16-
oc12/3-sfp and the other port is on an m1-choc12-as-sfp.
Table 25: MDA/Port Type Pairing for APS
MDA Type
Unchannelized
SONET/SDH (POS)
For example:
m16-oc12/3-sfp
ATM
For example:
m4-atmoc12/3-sfp
Circuit Emulation
(CES)
For example:
m4-choc3-ces-sfp
Channelized Any
Service Any Port
(ASAP)
For example:
m1-choc12-as-sfp
Unchannelized
SONET/SDH
(POS)
For example:
m16-oc12/3-sfp
Supported
ATM
For example:
m4-atmoc12/3-sfp
Supported
Circuit Emulation
(CES)
For example:
m4-choc3-ces-sfp
Supported
Channelized Any
Service Any Port
(ASAP)
For example:
m1-choc12-as-sfp
Supported