Alcatel-Lucent 7750 - Table 5: DDM Alarms and Warnings

Interface Configuration
7750 SR Interface Configuration Guide Page 35
The factory-programmed DDM alarms and warnings that are supported are summarized in
Table 5.
Table 5: DDM Alarms and Warnings
Parameter SFP/XFP Units SFP XFP Required? MSA DWDM
Temperature
- High Alarm
- Low Alarm
- High Warning
- Low Warning
CYesYesYesYes
Supply Voltage
- High Alarm
- Low Alarm
- High Warning
- Low Warning
µV Yes Yes Yes No
TX Bias Current
- High Alarm
- Low Alarm
- High Warning
- Low Warning
µA YesYesYesYes
TX Output Power
- High Alarm
- Low Alarm
- High Warning
- Low Warning
mW YesYesYesYes
RX Optical Power
- High Alarm
- Low Alarm
- High Warning
- Low Warning
mW YesYesYesYes
AUX1
- High Alarm
- Low Alarm
- High Warning
- Low Warning
parameter
dependent
(embedded in
transceiver)
No Yes Yes No
AUX2
- High Alarm
- Low Alarm
- High Warning
- Low Warning
parameter
dependent
(embedded in
transceiver)
No Yes Yes No