Alcatel-Lucent 7750 - Page 273

Command Reference
7750 SR Interface Configuration Guide Page 273
— encode wave-key key2 wave-key
—no encode
— [no] power-control
— target-power dBm
— [no] report-alarm [encode-fail] [encode-degrade] [power-
fail] [power-degrade] [power-high] [power-low]
— xgig {lan | wan}
— hybrid-buffer-allocation
— ing-weight access access-weight network network-weight
—no ing-weight
— egr-weight access access-weight network network-weight
—no egr-weight
— modify-buffer-allocation-rate
— ing-percentage-of-rate rate-percentage
—no ing-percentage-of-rate
— egr-percentage-of-rate rate-percentage
—no egr-percentage-of-rate
— named-pool-mode
— egress
— named-pool-policy policy-name
—no named-pool-policy
— ingress
— named-pool-policy policy-name
—no named-pool-policy
— network
—
egress
— [no] pool [name]
— amber-alarm-threshold percentage
—no amber-alarm-threshold
— red-alarm-threshold percentage
—no red-alarm-threshold
— resv-cbs percent-or-default amber-alarm-action step percent
max [1..100]
— resv-cbs percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— [no] otu
— [no] async-mapping
— fec {enhanced | g709}
—no fec
— otu2-lan-data-rate {11.049 | 11.0957}
— pm-tti
— expected auto-generated
— expected bytes byte [byte...(up to 64 max)]
— expected string identifier
— expected use-rx
— mismatch-reaction {
squelch-rx}
—no mismatch-reaction
— tx auto-generated
— tx bytes bytes [bytes...(up to 64 max)]
— tx string identifier
—no tx
— psi-payload
— expected bytes byte